公司新闻

首页 > 公司新闻
亚博app买球使用时注意事项
发布人:管理员   发布时间:2020-11-17

亚博app买球主要用于水泥生产护坡砖生产使用,一般工程聚丙烯塑料注射成型机注塑,亮度高,韧性强,不变形,容易脱模,破损率低的特点。使用起来非常方便,简洁,自然凝固脱模具干燥后可以使用。
The hexagonal slope protection mold is mainly used for cement production, slope protection brick production, general engineering polypropylene plastic injection molding machine injection molding, high brightness, strong toughness, no deformation, easy demoulding, low damage rate. It is very convenient and simple to use. It can be used after natural solidification and mold drying.

亚博app买球在使用时要注意:亚博app买球及配套加工设备原料的准备,主要有塑料模具或钢模具、混凝土原料、振动平台、小铲刀、脱模剂等。
Attention should be paid to the preparation of hexagonal slope protection mold and supporting processing equipment raw materials, mainly including plastic mold or steel mold, concrete raw material, vibration platform, small blade, release agent, etc.

     

将搅拌好的水泥混凝土原料注入已涂抹脱模剂的六角护坡塑料模具或钢模具内,安置于振动台振动排除气泡及整理平整;养护,切勿阳光暴晒及雨水冲刷。
The mixed cement concrete raw materials are injected into the hexagonal slope protection plastic mold or steel mold which has been coated with release agent, and placed on the vibration table to eliminate air bubbles and smooth the surface; maintenance, do not expose to the sun and rain wash.

根据实际季节调整养护时间,夏季一般为24小时左右,冬季则为48小时左右;亚博app买球脱模之后,应立即用小铲刀除去亚博app买球内壁遗留残渣,以方便再一次预制生产。
According to the actual season, the curing time is generally about 24 hours in summer and 48 hours in winter; after the mold of hexagonal slope protection is demoulded, the residue left on the inner wall of the hexagonal slope protection mold should be removed with a small shovel immediately, so as to facilitate the prefabrication and production again.

 

上一篇:没有了
xxfseo.com